Switchboard Upgrades in Roseville
Plenty of Roseville's Federation and bungalow homes are still wired to an original ceramic-fuse board, never upgraded to breakers.
We replace them with a modern, fully compliant board, tested and signed off properly.
Call (02) 9538 7356 or request a callback for your switchboard upgrade.
$50 Off Your First Service
New Roseville customers get $50 off your first service, on a switchboard upgrade or any other job.
AS/NZS 3000 Compliant
Every board we fit meets AS/NZS 3000 wiring rules, from the first circuit to the last.
Certificate of Compliance
We lodge a Certificate of Compliance for every notifiable switchboard job, no exceptions.
Clipsal and Hager Gear
We fit Clipsal and Hager switchgear, not cheap imports, on every board we touch.
What Our Switchboard Upgrades Work Covers
Swapping an old board isn't just a like-for-like trade of fuses for breakers.
Depending on what's actually behind the meter box, a Roseville switchboard job can stretch to cover:
- A new board sized for real use: built around the circuits your household actually runs today, not just a copy of what was there.
- Safety switches wherever they're missing: protection added circuit by circuit rather than a single blanket fix.
- Labelling that makes sense on sight: breakers marked clearly enough that anyone, tradie or not, can work out what's what.
- Whatever the old board was hiding: it's common to uncover a wiring issue once the original board comes off the wall, and we sort that out as we go.
- Headroom for what's next: boards get sized with capacity for an EV charger, ducted heating, or a home office down the track.
Six Signs Your Home Is Asking for Switchboard Upgrades
Switchboards rarely fail all at once. Watch for these signs, especially in an older Roseville home that has never had its board touched:
- Fuses blow regularly, or you keep a stash of spares near the board.
- The board still has ceramic fuse carriers instead of circuit breakers.
- You've never had a safety switch (RCD) fitted on any circuit.
- Lights flicker or dim when you run the kettle or a heater.
- You're planning renovations, an EV charger, or extra air conditioning.
- The board feels warm, smells odd, or shows scorch marks near the switches.
Why Roseville Properties Call For This
The Heritage Conservation Areas near The Grove are full of early Roseville houses, and plenty still carry a board fitted with ceramic fuses rather than circuit breakers.
These boards were sized for a few lights and outlets, well before dishwashers, ducted heating and home offices were part of everyday load.
A lot of the fuse carriers on these old boards are decades past their design life.
Parts for genuinely obsolete fuse gear are getting harder to source, so a fault can mean a wait rather than a quick swap.
Owners on these older streets are increasingly booking a full upgrade rather than patching an ageing board one fuse at a time.
The Factors Behind a Switchboard Upgrades Quote
No two switchboard jobs cost the same, because no two boards are the same. Here's what actually moves your quote:
- Board size and circuit count: a small unit needs fewer breakers than a large family home with ducted heating and several power circuits.
- Condition of the existing fuse carriers: original ceramic fuses often mean the whole board, not just a few fuses, needs replacing.
- Access to the switchboard: boards tucked into tight meter boxes or roof spaces take longer to reach and rewire safely.
- Extra safety switches needed: a board with zero RCDs needs more new safety switches fitted than one that already has a couple.
- Any defects found once we open it up: non-compliant wiring behind an old board sometimes needs fixing before we sign off.
We give a free written quote up front, at a fixed price, before anything is booked in. Plus, $50 off your first service if this is your first time with us.
How the Job Runs and How Long It Takes
- Quote and plan: we inspect your existing board, confirm circuit needs, and provide a free written quote before anything is scheduled.
- Power-down and swap: on the day, we isolate supply, remove the old board, and fit the new one, typically within a few hours for most homes.
- Testing: every circuit is tested, safety switches checked, and labelling confirmed before we call the job finished.
- Paperwork and clean-up: you get the signed-off compliance paperwork, we clean up fully, and walk you through the new board.
Compliance, Certificates and NSW Requirements
Switchboard work is notifiable electrical work in NSW, and DIY electrical work is illegal in NSW for anyone without a licence.
Every board we install meets AS/NZS 3000 wiring rules, and every circuit that needs one gets a safety switch (RCD) fitted.
Once the job passes testing, we lodge a Certificate of Compliance for electrical work with NSW Fair Trading.
You keep a copy for your files, showing the job was done properly and meets the standard.
The Difference on a Switchboard Upgrades Job
We fit Clipsal and Hager switchgear, not cheap imports, so the board still performs years after we've left.
Every notifiable job gets tested, signed off and lodged properly, giving you something on paper, not just a verbal assurance.
Our licensed team treats an old ceramic fuse board as the safety job it is, not a box-ticking swap.
Servicing Roseville and the Suburbs Around It
Switchboard upgrades often lead straight into other work: an EV charger installation once the board has capacity, or a level 2 electrician job if what feeds the board turns out to need attention too.
We're on Roseville's regular run, alongside nearby Lindfield, Killara and Chatswood, covering Roseville and the surrounding Ku-ring-gai area.
Call Us Today About Switchboard Upgrades
Old fuse board holding you back? Call (02) 9538 7356 for a free written quote, or book online and we'll be in touch.
Common questions
Your Switchboard Upgrades FAQs
A few things Roseville homeowners often want to know before booking:
Does a switchboard upgrade have to be done by a licensed sparkie?
Yes. DIY electrical work is illegal in NSW, and a switchboard upgrade counts as notifiable electrical work, so it has to be carried out and signed off by a licensed electrician.
Can a switchboard upgrade be done without turning off power all day?
The power only needs to be off while we swap the board over, which is usually a matter of hours, not the whole day. We confirm the timing with you before we start.
Will a switchboard upgrade still work with really old wiring?
Yes, we can fit a modern board even where the house wiring itself is older. If we find non-compliant wiring behind the old board, we flag it and quote separately rather than assume you want it fixed on the spot.
Who supplies the parts, you or me?
We supply everything, fitting quality switchgear, not cheap imports, as standard on every board.
Does a switchboard upgrade involve any notification paperwork in NSW?
Yes. It is notifiable electrical work, so once it is tested we lodge a Certificate of Compliance for electrical work with NSW Fair Trading.
Can you give me a ballpark on a switchboard upgrade?
We don't charge by the hour, and the price depends on board size, the state of your existing fuses, and how much rewiring the job uncovers. We always give a free written quote before we start.